JSTQI

Nortel  Phone System
Business Phone Systems

800-475-0989

www.jstqi.com

NORSTAR COMPACT ICS RELEASE 6.1 ( 2003 )

A Compact ICS is a flexible building-block design expands with your business easily and cost-effectively. The CICS expands from a 4x8 to an 8x24 capacity.

Hardware
  • Two slots for universal 4x0 LS/DS or 4x0 CI trunk cartridge
  • One expansion slot for 8 port TCM station expansion
  • Up to 16 stations built in to main KSU
  • Compact space saving design with built in power supply.
  • Two 50-pin male amphenol connections for interconnections cables for the stations and lines ,the amphenols is also used for connection of external devices such as Music on Hold source, loudspeaker paging and a relay contact for auxiliary ringers.
  • Built in analog terminal adapter (1) The Internal Analog Terminal Adapter
    (I- ATA) provides one connection for a modem, fax machine or analog telephone and does not take up a station port from total number of the digital stations.
  • Built in remote access device software dependable (IRAD) Once the IRAD is enabled, Norstar Remote Utilities software, allows remote programming for adds, moves, changes and troubleshooting. Moves, adds and changes can now be done from a remote site.

Key popular features include:

  • Supports Voice mail
  • Integrated Automated Attendant
  • Computer telephony integration (CTI)
  • Supports all Norstar and Business Series Terminals.
  • Calling Line Identification (CLID)
  • Direct Inward System Access (DISA) for remote dial-in
  • Auto Daylight Savings Time
  • Paging
  • Music on Hold
  • Automatic Set Relocation

Toll RestrictionThe administration or the programming can be done from any extension on the system with M7310 phone or a larger phone. Or by using a computer with NRU (Norstar remote utility) software and connect to the FastRad either directly through a serial connection or remotely using a line.

 

 

Features

All features of release 6
New Features 6.1

  • Key Indicator Module (KIM) and T7316E Business Series Terminal (BST) create a Central Answering Position (CAP). These two pieces of hardware are designed to replace the M7324/CAP setup. The T7316E can also be deployed as a stand-alone unit, and works the same way as previous versions of the T7316 with some minor changes, including an active hands free key below the main dial pad. The KIM can be used in two configurations. The ordinary KIM (OKIM) has the same functionality as the current unassigned CAP module. The enhanced KIM (eKIM) supports multiple lines, including target lines, and hunt group appearances. Up to four KIMs can be attached to a T7316E, without requiring a supplementary power supply. A T7316E can only support

a maximum of four eKIMs, however, it can support up to nine OKIMs, with the addition of a station auxiliary power supply (SAPS). The system can support one CAP with an eKIM. This number will include any T7324- based CAP installations you might already have. The system can support any number of CAPS using OKIMs. T7316E telephones and KIMs also provide call-specific icons to make call tracking easier. You cannot program Answer DNs onto a KIM.
Destination code enhancements
12-digit destination code: You can specify up to 12 digits as a destination code, which allows you to support user expectations of dialing requirements for existing systems. For instance, if your users are used to dialing 91XXX-XXX-XXXX for a long distance call, they can continue to do so, so you can provide a seamless transition to network dialing
Multiple least-cost routing: When you specify a schedule other than Normal for a destination code, you can specify up to three possible routes the call can access, in order of preference. The system tries the first route, and if that route is not available, the system moves to the next route, and so on
Silent monitor for hunt groups
Your Hunt group supervisors can now monitor hunt group calls, either silently, or by providing a conference tone to indicate that the call is being monitored, Other new functionality has been added to allow you to determine which telephones will be allowed to silent monitor, how many monitoring telephones your system will allow and what password is required to enter a monitoring session
CLID display enhancements: display an incoming call CLID on a telephone with activated CLID display, where a call is currently active.

Voicemail Capabilities:

  • Call pilot all releases (release 2.0 or higher recommended)
  • Star talk flash release 2.0 or higher
  • Norstar Application module (NAM) release 4.1

ACD application

  • Flash ACD release 2.0
  • Call pilot ACD
  • ACD Minuet release1.3
  • ACD Prelude, CinphonyI, Cinphony II Release3.6 or higher

Norstar Remote Utilities (Remote programming options)

Norstar remote utility (NRU) release 10.0 or higher

Desktop application

  • CTA 100
  • CTA 150i (Discontinued)
  • CTA 160i
  • CTA 200
  • CTA 500 (Discontinued)

Hardware Compatibilities:

Modules:

  • LS/DS Analog Trunk Cartridge
  • Caller ID Trunk Cartridge
  • Combination Services Cartridge
  • Services Cartridge (DISCONTINUED)
    * 2-port U Interface ISDN-BRI
    * 4-port U Interface ISDN-BRI
    * 4-port S/T Interface ISDN-BRI

Auxiliary Equipments:

  • Door phone and Door opener controller (DOC)
  • SMDR6
  • ATA 2
  • Fast RAD and fast RAD2
  • VMI
  • T24 KIM module
  • Central Answering Position (CAP) module
  • Busy Lamp Field (BLF) Module (M7310 must be at least release 18 or higher in order to work correctly)
  • Polycom Audio conference unit (ACU)
  • Norstar VOIP Gateway unit
  • DS30 station port adapter

Telephone sets:

  • M7100
  • M 7208
  • M7310
  • M7410
  • M7324
  • T7100
  • T7208
  • T7316 (the first 6 button will not function as a line button only as a feature button)
  • T7316E
  • T7406