Overview

Speaker E-10A

The Viking E-10A and E-20B are telephone line powered speaker phones designed to provide two-way handsfree communication. Both function identically, but are available in two different housings to better suit the application. When the “Call” button is pressed, the Viking E-10A or E-20B will come off-hook and will remain off-hook until a CPC signal is detected, the programmed timeout has elapsed, a busy signal is detected, or the call goes silent, making the unit automatically disconnect. The Viking E-10A/20B can be connected directly to a C.O. line or analog PABX/KSU station when programmed as a ringdown circuit, or used with a Viking Hot-Line Dialer. If a line or station is not available, Viking’s DLE-200B ring down circuit can be used. One, or up to four, Viking E-10A/20B speaker phones can share an existing phone line in a house or small business when used with a Viking C-200 or C-2000A (respectively) Entry Phone Controllers. For outdoor or harsh environments, the Viking E-10A/20B are available with Enhanced Weather Protection (EWP). The Viking E-10A-EWP and E-20B-EWP feature rubber gaskets and boots, closed cell foam gasketing, hand soldered silicon sealed connections, anti-corrosive gel filled tip and ring connectors, as well as urethane encapsulated circuit boards with internally sealed, field-adjustable trim POTS and DIP switches

Specifications

Speaker E10A

• Alternate action call button to place or cancel a call
• Intelligent call progress detection for automatic hang-up on CPC, silence, busy signal, or time out
• Telephone line powered
• Weather resistant features: mylar speaker, gaskets, internally sealed push button switch, UV stable exterior, enamel coated PCB
• Optional Enhanced Weather Protection (EWP) available for greater weather resistance
• Adjustable microphone and speaker volume
• Programmable maximum call length
• Selectable auto-answer feature allows remote monitoring
• Two way handsfree communication
• Programmable VOX (mic/speaker) switching speed
• Viking E-10A/E-10A-EWP Features:
  - Vandal resistant, black powder painted, aluminum face plate with heavy duty metal call button and mounting gasket
  - Flush mountable using included plastic rough-in box part # 259576
  - Surface mountable with an optional VE-5x5
• Power: Telephone line powered (18 VDC/20mA minimum)
• E-10 Dimensions: Overall: 127mm x 127mm x 57.2mm (5” x 5” x 2.25”), Rough-in box: 102mm x 102mm x 57mm (4” x 4” x 2.25”) E-20A Dimensions: 140mm x 115mm x 38mm (5.5” x 4.5” x 1.5”)
• Standard Viking E-10A/E-20A Environment: -26 C to 54 C (-15 F to 130 F) with 5% to 95% non-condensing humidity
• E-10/E-20A-EWP Environment: -26 C to 54 C (-15 F to 130 F) with up to 100% condensing humidity
• Speaker Volume: Approximately 70db maximum @ 1m
• Ring Voltage: 25V AC RMS minimum
• CPC Disconnect Time: 300ms minimum
• REN: 0.8A
• Standard Connections: (1) 2-position terminal block
• EWP Connections: (2) gel-filled butt connectors

Applications

Viking E-10A

• Commercial, industrial and residential door security
• Door or gate communication
• Business delivery entrances
• Use in conjunction with a Viking K-1900-5 Dialer on C.O. lines or analog PABX/KSU stations
• Use on any programmed ringdown circuit of an analog PABX/KSU station

Documents

Viking E-10A Speaker Phone

• Viking E-10A Speaker Phone Technical Information

Tech Support

Viking E-10A Speaker Phone

The Technical Support Service
offered involves technical assistance by telephone and the Web for issues associated with the products purchased from JSTQI.

Thoroughly trained on our products the support team has access to our real-time, knowledge base and captive network models, which help them, replicate and resolve problems while avoiding disruption of your network.

 

Please call us for technical questions and support
Toll Free: 800.626.4670