
	Manufacturers



	Categories



	Recover password

	Privacy statement

	Terms & Conditions

JSTQI :: Sangoma

Sangoma A101DE AFT Card #23939

Sku : A101DE

Sangoma A101DE AFT Card (A101DE - Sangoma A101DE Single T1/E1/J1 PCI Express Interface Card with Echo Cancellation)




For Best Price Call 800.626.4670 or Email Us.

Sangoma A101DE AFT Card:

Overview

The Sangoma A101DE AFT Card supporting single T1/E1/J1 or fractional T1/E1/J1 data streams with 1024 tap (128ms) hardware based echo cancellor across 30 channels. The A101DE is part of Sangoma’s family of Advanced Flexible Telecommunications hardware product line - uses the same high-performance PCI Express interface that is providing superior performance in critical systems. The Sangoma A101DE supports up to 2.048 Mbps of full duplex data through-put or up to 30 voice calls over a single T1, E1, or J1 line. The A101DE, like all cards in Sangoma’s AFT family, is field upgradeable with crash-proof firmware. Choose the Sangoma A101DE card with Octasic’s DSP hardware and certified algorithms to achieve carrier-grade echo cancellation and Voice Quality Enhancement functions on your open source or even proprietary telephone system.

Sangoma A101DE AFT Card Features:

One T1/E1/J1 port with optimum PCI Express or PCI interface for high performance voice and data applications.
Line decoding: HDB3, AMI, B8ZS.
Framing: CRC-4, Non CRC4, ESF, SF, D4. Also compatible with Japan’s J1.
Support for AsteriskTM, YateTM, and FreeSwitchTM PBX/IVR Projects, open source and proprietary PBX/Switch/IVR/VoIP gateway applications.
Sangoma’s AFT products use the same base PCI interface card and the same professionally engineered firmware on the same family of Field Upgradeable Gate Arrays.
Compatible with all commercially available motherboards - proper PCI-standard interrupt sharing without manual tuning.
PCI Express: 1 Lane PCI Express bus.
Dimensions: 2U Form factor: 120 mm x 55 mm for use in restricted chassis.
Includes high quality, tested RJ45 cables and short 2U mounting clips for installation in 2U rack mount servers.
Power: 800 mA peak, operational 300 mA max at +3.3 V or 5 V.
Temperature range: 0–50 °C.
Autosense compatibility with 5 V and 3.3 V PCI busses.
Intelligent hardware: Downloadable FPGA programming with multiple operating modes.
32-bit bus master DMA data exchanges across PCI interface at 132 Mbytes/sec for minimum host processor intervention.
Ring buffer DMA handling for minimum host intervention and guaranteed data integrity on high volume systems.
Supports Robbed Bit Channel Associated Signaling (CAS) and ISDN PRI.
T1/E1/J1 and fractional T1/E1/J1, multiple channel HDLC per line for mixed data/TDM voice applications.
Optimized per channel DMA streams and hardware-level HDLC handling unload the host CPU.
Use raw bitstream interfaces to support arbitrary non-standard line protocols, such as non-byte aligned monosynch or bisynch.
WANPIPE routing stack is completely independent of TDM voice application for total system reliability.
WANPIPE supports certified, field-tested, and reliable Frame Relay, PPP, HDLC, and X.25.
Optional DSP daughterboard on the A101DE
G.168–2002 echo cancellation in hardware.
1014 taps/128ms tail per channel on all 256 channels.
DTMF decoding and tone recognition.
Voice quality enhancement: Octasic music protection, acoustic echo control, and adaptive noise reduction.

Tech Support

Sangoma A101DE AFT Card

The Technical Support Service
offered involves technical assistance by telephone and the Web for issues associated with the products purchased from JSTQI.

Thoroughly trained on our products the support team has access to our real-time, knowledge base and captive network models, which help them, replicate and resolve problems while avoiding disruption of your network.